
This product is
WaterMark
Certified
DRINKING WATER FOUNTAINS
HDPE Drinking Fountain & Water Bubbler with Tap | Chilled & Non-Filtered | 20L/hr
Fast dispatch from Wyong, NSW
Order before 12pm on a business day for same-day dispatch. After 12pm will be next business day.
Free shippingMetro & regional Australia
Remote postcodes incur an additional fee. Check yours below.
Delivery times after dispatch
See results for your state
Deliveries to New South Wales
Data is calculated from the last 90 days of orders.
Check your postcode for remote fees
Shipping details · Final shipping cost confirmed at checkout.
12 month warranty on all units - warranty policy
Questions? Call (02) 8772 8162 Mon-Thu 9am-3pm · Fri 9am-1pm AEST
- Model
- YL-600P
- Cooling capacity
- 20 L/hr
- Water temperature
- Approx. 8 - 12 °C
- WaterMark
- Certificate 023484
Specifications
- SKU
- EA-BUB-COMM-03-NF
- Brand name
- Enviro Aqua
- Manufacturer model ID
- YL-600P
- WaterMark model name
- Water Bubbler Grey
- WaterMark certificate
- 023484
- Product type
- Chilled non-filtered water bubbler / drinking fountain
- Cooling capacity
- 20 L/hr
- Chilled water temperature
- Approximately 8 to 12 °C
- Filtration
- Not included
- Cabinet material
- HDPE polymer
- Total height
- 125 cm
- Unit height
- 99.5 cm
- Width
- 40 cm
- Depth
- 40 cm
- Bubbler height
- 8.5 cm
- Tap height above unit
- 25.5 cm
- Cabinet properties
- Durable, non-metal construction
- Bottle / glass fill side tap
- Yes
- Recommended location
- Indoor commercial locations
- Water connection
- Mains-connected
The Granite-inspired HDPE water fountain with bubbler and tap delivers approximately 20 litres per hour of chilled water at around 8 - 12°C. This is the same fountain hardware as our filtered configuration, supplied without the filter cartridge, for sites that do not require additional water filtration.
The granite-inspired HDPE cabinet, dispensing fixtures, cooling system, power requirements, dimensions and installation connections are unchanged. It connects directly to the mains water supply.
WaterMark-certified fountain model YL-600P under licence 23484 / WMTS-105:2016, with lead-free wetted components. A licensed plumber should handle installation.
Filtration: Not included. Choose the filtered configuration if you would like a filter cartridge supplied.
Key features
- Granite-inspired HDPE cabinet
- 20 L/hr chilled-water capacity
- Approximately 8 - 12 °C chilled-water output
- Bubbler spout + side tap for bottle filling
- WaterMark Certificate 023484
- Supplied without a filtration cartridge
Recommended for
- Indoor school and campus facilities
- Factories and warehouses
- Indoor sports and leisure facilities
- Gyms and recreation centres
- Offices and commercial workplaces
Compliance & certification
Enviro Aqua YL-600P, WaterMark model name Water Bubbler Grey, is WaterMark certified under Certificate 023484. Confirm site-specific plumbing, drainage, and electrical requirements with the relevant licensed trades before installation.
Questions about this model
For a side-by-side comparison of cooling, cabinet, bottle-fill and location options, see the commercial water bubbler guide.
What is the granite-look cabinet made from?
The cabinet is made from high-density polyethylene (HDPE), a durable, non-metal material with a distinctive granite-inspired finish. It offers a modern, stone-look appearance without the weight of natural granite, making it a practical choice for commercial drinking fountains.
What makes the granite-inspired cabinet different?
The outer cabinet is made from durable high-density polyethylene (HDPE) with a granite-inspired appearance. It offers a distinctive stone-look design and is an alternative to the stainless steel finish available on our other fountains.
Does this fountain provide chilled drinking water?
Yes. The integrated cooling system provides approximately 8 to 12°C chilled water under rated conditions, with a cooling capacity of 20 litres per hour. Actual performance varies depending on water temperature, surrounding conditions and usage.
Can I refill water bottles as well as drink directly from the bubbler?
Absolutely. The fountain combines a traditional direct-drinking bubbler with a separate filling tap, allowing users to take a quick drink or conveniently refill bottles, glasses and jugs.
Does this water bubbler require professional installation?
Yes. This fountain requires a mains-water supply, appropriate drainage and a suitable electrical connection for the cooling system. An appropriately licensed plumber should complete the plumbing installation and confirm the site's requirements.
Is a filter cartridge included?
No. This is the non-filtered configuration of the same fountain. The filtered version is available separately for customers who require filtration.
Ready to order?
Order before 12:00pm AEST on a business day for same-day dispatch from Wyong NSW. See shipping details.
More drinking fountains
What customers say
5.0 from 74 customer reviews
- Facebook
“Brilliant - everything supplied including pressure limiting valve. Very easy to fit. Best water ever. Best service and communication with the supplier.”
- Facebook
“Great product, great service. Stop wasting plastic and get this done. Highly recommended. Hussam was super helpful.”
Australian-owned
Real Wyong NSW warehouse and showroom, with local product support.
Commercial product support
We can help with model selection, replacement filters and service-related product questions.
Clear installation details
Connection, cooling and compliance information is shown on the product page where applicable.

HDPE Drinking Fountain & Water Bubbler with Tap | Chilled & Non-Filtered | 20L/hr
$1300
